L-Track Cover Strip - Black or Grey Rubber
Extruded Press-In L-Track Cover is Sold per foot
- Smooths the Floor of Transit Vehicles
- Prevents Dirt & Waste from Becoming Trapped in L-Track Recesses
- Can be ordered cut-to-length for Longer or Shorter L-Track Lengths. There is no cut charge for special lengths
- Extruded from TPE ( Sha 90 +/-5 & Sha 60+/-5) which withstands normal UV-radiation and ozone exposure
The extruded, press-in covers are designed specifically for use on L-Track sections that are used to secure mobility devices in transport buses, vans, or other vehicles. The covers are used on sections of L-Tracks that are not in use. The cover strip creates a smooth bridge from one side of the track to the other while making maneuvering much easier as sharp edges and pockets on the vehicle floor are eliminated. In addition, the cover strip prevents dirt and waste from clogging the L-Track in high-use vehicles. Trims easily with an Exacto blade (not included) for final installation.
Stay compliant with the updated ADA accessibility guidelines (ADAAG) for buses and vans.
T302.1 General. Walking surfaces in non-rail vehicles shall comply with T302.
T302.2 Slip Resistant. Walking surfaces shall be slip resistant.
T302.3 Openings. Openings in walking surfaces shall not allow the passage of a sphere more than 5/8 inch (16 mm) in diameter. Elongated openings shall be placed so that the long dimension is perpendicular to the dominant direction of travel.
T302.4 Surface Discontinuities. Surface discontinuities shall be ½ inch (13 mm) high maximum and shall be beveled with a slope not steeper than 1:2.
BLACK SKU: 150351 - NEW SKU 10024457
English
Chinese (Traditional)
Danish
French
German
Italian
Japanese
Russian
Spanish